Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
The system operation functions are explained below:
Shutdown the Device
Reboot the Device
Restore the Factory Default Settings
Except IP Address and Web Access Port
In the HDD Operation section, the following can be performed:
HDD Status
Format
Unmount/Mount
Click this button to shut down the Hub.
Click this button to restart the Hub.
Click this button to restore the Hub to factory
default settings.
If this option is checked, then the Hub' IP
address and the port number for accessing web
interface will be preserved after factory reset.
Indicates HDD operation status such as normal
or Empty.
Please format the HDD to ext3 filesystem to be
recognized by the system. Please be aware that
you will lose all information on the HDD once
you proceed with the operation.
Before physically removing the HDD from the
slot to replace it, unmount it first from the
filesystem. Click Mount to let the system
recognize the HDD as a storage device after
installing it in the device.
26
System Settings
Advertisement
Table of Contents
