Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
Facebook Authorize Domain
Google Client ID/Secret ID
Google Authorize Domain
Automatic Time Configuration
Enable NTP Server
NTP Server
Country Settings
Select Country
Time Zone
Enable Daylight Saving
DST Start (24HR)
DST End (24HR)
DST Offset (minutes)
External Syslog Server Settings
External Syslog Server
(Captive Portal Log)
Click Save to save the values and update the screen.
Once the settings are updated, the configuration must be uploaded to the access points. See
Profile Settings for more information.
Performance
The Performance page allows you to configure the wireless performance for access points on
your network. Advanced wireless settings can be configured on the page for individual
2.4GHz and 5GHz frequency bands. Navigate to Configuration > Profile Settings > [Site] >
[Network] > Performance to view existing settings.
If using Facebook Sign-in method, enter the authorization
domain name.
If using Google Sign-in method, enter the client and secret
ID.
If using Google Sign-in method, enter the authorization
domain name.
Check the box to enable the Network Time Protocol (NTP)
for automatic time synchronization.
Enter the IP address or domain name of the NTP server.
Select the country region of APs on the network.
Select the time zone.
Check the box to enable daylight saving in your time zone.
Specify the start date and time for Daylight Saving Time
(DST).
Specify the end date and time for Daylight Saving Time
(DST).
Specify DST Offset time.
Enter the IP address or domain name of the external
syslog server.
69
AP Network
Advertisement
Table of Contents
