Table of Contents
Advertisement
Nuclias Connect Hub Plus User Manual
Configuration > Profile Settings > [Site] > [Network] > VLAN to view existing settings.
VLAN Status
Click the drop-down menu to enable or disable VLANs.
VLAN List
The VLAN List shows a list of created VLANs and their members with Tag/Untag information.
You can click
to modify a selected VLAN or
Port List
The Port List tab shows the VLAN membership assignment of the ports. It also shows the
PVID information of each port.
Add/Edit VLAN
The Add/Edit VLAN page allows you to create a new VLAN identified by a VLAN ID and assign
ports to that VLAN.
Use the following steps to configure a VLAN:
1.
Specify the VLAN ID and the name. The VLAN ID is a unique value assigned to a VLAN.
Enter a value between 1 and 4094.
2.
Map the listed interfaces and SSIDs for different radio bands to this VLAN with the
following options:
Untagged – Make the interface/SSID untagged from the VLAN. For tagged frames, tags
will be removed before being forwarded.
Tagged – Include the interface/SSID as a member of the VLAN and its frames will be
tagged with the VLAN ID. It will only accept frames tagged with the same VID. For
untagged frames, they will be tagged with PVID before being forwarded.
Not Member – Exclude the interface/SSID from the VLAN.
to delete a VLAN configuration.
63
AP Network
Advertisement
Table of Contents
