Fig. 8-3: Preparing The Cable; Fig. 8-4: Connecting The Female Connector Strip - Bosch Rexroth IndraControl VCP 11.2 Project Planning Manual

8-4 Bosch Rexroth AG | Electric Drives and Controls
Maintenance and Installation

Fig. 8-3: Preparing the cable

2. Fit the wires with wire end ferrules and connect the wires to the con-
nector.

Fig. 8-4: Connecting the female connector strip

If shielded connecting cables are used in the supply voltage area, the
shield should be connected to pin 1.
3. Plug the female connector strip onto connector X1.
Rexroth IndraControl VCP 11.2 | R911311481 / 03