Master Slave Connection (X6, X7) - Bosch Rexroth PSI 6 Series Operating Instructions Manual

1070080028 / 08 | PSI 6xxx
7.2.18

Master slave connection (X6, X7)

For master slave operation, please also refer to section 13.3 starting
"
on page 420.
Connection: to the slave: X7;
D‐Sub, 9 pins, by male connector on the cable side.
to the Master: X6;
D‐Sub, 9 pins, by female connector on the cable side.
Signals are galvanically isolated.
Ordering no. of cable set (5 m): 088112
Line length: between 2 units max. 5 m
(with the line type recommended)
Line type: shielded, core cross-section min. 0.34 mm
(e.g.: 10 x 0.34 mm
X7
1
2
3
4
5
6
7
8
9
Female connector
Large−size screen across the metallic housing of the plug connection
Fig. 85: Master slave connection
Once a unit detects an existing connection to X6, it is automatically
parameterized as slave!
Bosch Rexroth AG
2
LiYCY)
X6
max. 5 m
1
2
3
4
5
6
7
8
9
Male connector
385 / 460
Assembly
2
,