Bosch Rexroth PSI 6 Series Operating Instructions Manual page 281

1070080028 / 08 | PSI 6xxx
7 LED for module status:
Off:
Green:
Green, flashing once: diagnostic event detected
Green, flashing twice: triggered by SW tool for module identification
Red:
Red, flashing once:
Red, flashing twice:
Red, flashing 3 times: station name not defined
Red, flashing 4 times: module error
For information on installation, refer to Section 13.2.1 from
page 416.
Use the "AnyBus IPconfig" software for the configuration of the
Ethernet (installation file is included in the BOS software package,
refer to BOS data medium: directory path "Tools/Anybus").
Bosch Rexroth AG
Information on this product
module not initialized
module is working normally
in the network
module error that can possibly be corrected by
rebooting the timer
configuration error
IP address not defined
281 / 460