Table B-4 Power Supply Rack Connection Lugs; Table B-5 Battery Connection Lugs - Motorola iDEN Site Controller System Manual

Appendix B Parts & Suppliers
B-12
GNB Technologies
829 Parkview Boulevard
Lombard, IL 60148
Phone: 708 629-5200
Phone: 800 872-0471
Fax: 708 629-2635
Refer to Table B-4 to determine the proper wire lug for the connection of
that wire to the Power Supply Rack.
Table B-4 Power Supply Rack connection lugs
Wire size
4/0 double 3/8" hole, 1" center
250 MCM double 3/8" hole, 1" center
350 MCM double 3/8" hole, 1" center
500 MCM double 3/8" hole, 1" center
† All part numbers are Thomas & Betts.
Refer to Table B-5 to determine the proper wire lug for the connection to the
batteries, based on the wire size and battery manufacturer. One column lists
the selection for Dynasty and the other lists the selection for Absolyte IIP.
Table B-5 Battery connection lugs
Lug
Wire size color
4/0 purple
250 MCM yellow
350 MCM red
500 MCM brown
Cabinet lug
Dynasty
Description P/N
double 3/8" hole, 54212
1" center
double 3/8" hole, 54215
1" center
double 3/8" hole, 54218
1" center
double 3/8" hole, 54220
1" center
Gen 3 Site Controller System Manual
Crimp tool Lug P/N †
TBM5-S 54212
TBM8-S 54213
TBM8-S 54215
TBM8-S 54218
Absolyte IIP
Description
single 1/2" hole 54170
single 1/2" hole 54113
single 1/2" hole 54115
single 5/8" hole 54118
68P80801E30-A 5/1/2002
P/N