Final Checkout Setup; Figure 5-1 Cabinet Breaker Panel For Standard Site Controller Rack Or - Motorola iDEN Site Controller System Manual

Chapter 5 Final Checkout

Final Checkout Setup

Final Checkout Setup
Figure 5-1 Cabinet Breaker Panel for standard site
controller rack or SRRC (front view)
5-2
The following procedures should be performed after installation of the site
controller is complete. This Final Checkout procedure ensures the proper
operation of the site controller.
On the Cabinet, set all circuit breakers to OFF.
1.
Figure 5-1 shows the Cabinet Breaker Panel.
BR1 BR3
ON ON
OFF OFF
OFF OFF
25A 25A
For details of the AC/DC Power System for the SRSC, refer to the SRSC
GEN 4 EBTS section of the EBTS System Manual. (on CD: 98P80800A17)
Gen 3 Site Controller System Manual
RFS1 RFS3 CTRL A BR2 BR4
ON ON ON ON ON
OFF OFF OFF OFF OFF
OFF OFF OFF OFF OFF
3A 3A 7.5A 25A 25A
RFS2 EAS/IMU CTRL B
ON
ON ON ON
OFF OFF OFF
OFF
OFF OFF OFF
3A 7.5A 7.5A
iSC076
060796JNM
68P80801E30-A 5/1/2002