Connectors; Table 9-2 Front Panel Switches; Table 9-3 Front Panel Connectors - Motorola iDEN Site Controller System Manual

Gen 3 Site Controller System Manual
Table 9-2 Front Panel Switches
Switch Name
Sel / Loop
Abort / Reset
Power

Connectors

Table 9-3 Front Panel Connectors
Connector
Service Access
Mon
T1 / E1 Net
Mon /Eqp
68P80801E30-A 5/1/2002
Push to select T1 / E1 span. Push and hold (> 2 seconds) to loop / deloop selected span.
Push for abort. Push and hold (>2 seconds) for reset
Power On / Off switch
The following connectors are located on the front panel:
Network Access bantam jacks – bantam jacks provide access for
I
servicing the T1/E1 network
Monitor SMB port – provides access for monitoring the time and
I
frequency reference signals
Service Access DB9 connection – provides MMI serial port access
I
.
Serial RS232 MMI (Man Machine Interface)
5MHz / 1PPS monitor
Net -> Eqp / Net: Break into T1 / E1 from network (receive T1 / E1)
Net -> Eqp / Mon: Monitor T1 / E1 from network (receive T1 / E1)
Net -> Eqp / Eqp: Break into T1 / E1 to equipment (receive T1 / E1)
Net <- Eqp / Net: Break into T1 / E1 to network (transmit T1 / E1)
Net <- Eqp / Mon: Monitor T1 / E1 to network (transmit T1 / E1)
Net <- Eqp / Eqp: Break into T1 / E1 from equipment (transmit T1 / E1)
Switch Function
Function
Chapter 9 Controller
Controller
9-5