Canon imagePRESS Server G200 Configuration And Setup page 51

User
SNMP v3 (Secure)
Note: Some utilities require that you set the security level to Minimum in an SNMP v1 environment.
Read Community Name
Specify the SNMP Read Community Name. When it is changed, the new community name must be entered to
read any information in Configure. You can use a maximum of 32 ASCII characters, including spaces, for the
community name.
A space at the beginning or end of the name is automatically deleted from the name entered. When an invalid
character is entered, the default "public" is used for the Read Community Name. A name consisting only of
spaces is invalid.
Write Community Name
Specify the SNMP Write Community Name.
Unsecure user username
If you selected Minimum or Medium for Security Level, specify a user name for which authentication and
encryption are not used.
Secure User Username
Specify a user name for which authentication (and if necessary, encryption) is used.
Authentication Type
Select the type of authentication.
Authentication Password
Enter the password for reading MIB (Management Information Base) values based on the secure user name.
Privacy Type
Select the type of encryption algorithm.
Privacy Password
Specify the privacy password.
Access Minimum
Write Yes
Configuration and Setup
Setting up from the printer control panel
Medium Maximum
Yes Yes
51