Canon imagePRESS Server G200 Configuration And Setup page 47

Timeout (sec)
Specify the maximum amount of time to elapse before the imagePRESS Server stops attempting to establish a
connection.
Port 9100
Enable Port 9100
Select this option to allow applications to open a TCP/IP socket to the imagePRESS Server at Port 9100 to
download a print job.
Port 9100 Queue
Specify the imagePRESS Server print connection for downloading jobs to Port 9100. This field lists the standard
print connections and any published virtual printers. Only the print connections you have published are
available.
Timeout (sec)
Specify the maximum amount of time to elapse before the imagePRESS Server stops attempting to establish a
connection.
FTP
The imagePRESS Server supports FTP printing for Windows, Mac OS, UNIX, Linux and other operating systems
that support the FTP protocol. The imagePRESS Server supports the RFC959 features that are required to download
and print jobs.
Note: The Scan to FTP and Scan to Internet FAX functions may display in this section but are not applicable to this
product.
Use FTP Passive mode
When this option is selected, the FTP server opens a dynamic port, sends the FTP client the server's IP address
to connect to and the port on which it is listening over the control stream and waits for a connection from the
FTP client.
Enable FTP Printing
Select this option to allow FTP printing on the imagePRESS Server.
Default FTP queue
Select the default connection for printing jobs from FTP Printing if it is not set by the user or was set incorrectly.
Configuration and Setup
Setting up from the printer control panel
47