Canon imagePRESS Server G200 Configuration And Setup page 50

Timeout (sec)
Specify the maximum amount of time to elapse before the imagePRESS Server stops attempting to connect to
the LDAP server.
Web Services
Enable Web Services
Select to make WebTools available to users.
Enable IPP
Select whether to enable printing with the Internet Printing Protocol (IPP). You must select Enable Web
Services. You can only print to the Print queue when you use IPP. The Direct connection and the Hold queue
are not supported with IPP.
For information about setting up user computers to use IPP printing, see Printing.
SNMP
Enable SNMP
Select to enable SNMP communication over an IP connection.
Restore SNMP to Defaults
Press to restore SNMP settings to defaults.
Security Level
Select the level of security provided by the imagePRESS Server.
The following table describes the access for the security levels.
User
SNMP v1
SNMP v1
SNMP v3 (Unsecure)
SNMP v3 (Unsecure)
SNMP v3 (Secure)
Access Minimum
Read Yes
Write Yes
Read Yes
Write No
Read Yes
Configuration and Setup
Setting up from the printer control panel
Medium Maximum
Yes No
No No
Yes No
No No
Yes Yes
50