Configuration Examples For Various Use Cases; Interactive Lecture; Basic Configuration - Sony Vision Exchange PEQ-C100 System Integration & Services Manual

3. Configuration Examples for Various Use Cases

This section describes samples of the required system configuration for various use cases. This
is intended as reference information for when designing a system.

Interactive Lecture

Basic configuration

An "interactive lecture" is a function that can be used with the minimum configuration. The
configuration for an interactive lecture is recommended as the base system when evaluating
the configuration for other extended configurations.
The interactive lecture configuration is based on a classroom or conference room, where the
images of computers etc. (user devices) possessed by each participant are displayed by a
projector, and the discussion proceeds while switching between the displayed images of
devices.
HDMI input
User device
The required equipment is listed below.
Equipment
HDMI display
USB mouse
USB keyboard
System configuration
HDMI display
Main Unit
Quantity
1 LCD TVs, such as BRAVIA, and projectors can be used.
More intuitive operation is possible using a touch panel type
display.
1 Used for operation of the main unit during installation,
operation, and maintenance.
Not required for operation if using a touch panel device.
However, the mouse is required for maintenance use.
1 One USB keyboard is recommended for maintenance use.
A software keyboard can be used when it is necessary to
input characters while using the unit.
HDMI output
Remarks
8
USB mouse
USB keyboard