Installing Third-Party Software; Third-Party Applications; Third-Party Device Drivers; Precautions When Using Hdcp Content - Sony Vision Exchange PEQ-C100 System Integration & Services Manual

Collaboration system
Hide thumbs Also See for Vision Exchange PEQ-C100:
Table of Contents

Advertisement

Installing Third-Party Software

Whitelisting type antivirus software is installed in the main unit.
Accordingly, software installed without using the following procedure will not function.
Notes
Use of third-party device connections and third-party device drivers are not covered by the
Vision Exchange operational guarantee.
Verify correct operation sufficiently before use. Installation is the responsibility of the
system administrator.
Support is not offered for cases where third-party device drivers cannot be installed or
where third-party connected devices do not operate.

Third-party applications

Third-party applications should not be installed on the main unit.
Doing so may adversely affect the performance and operation of the main unit.

Third-party device drivers

Device drivers must be installed separately for touch panel displays and other devices whose
connection is not recognized by the Windows standard driver. Prepare a dedicated device
driver or a device driver with installer from the manufacturer of devices to connect, and install
using the following procedure.
1.
Log in as the OS administrator.
2.
On the main unit, run Maintenance.exe from the desktop. On a Pod, launch Command
Prompt from the Windows menu.
Command Prompt launches.
3.
Install the device driver or run the installer using the Command Prompt commands.
For details, refer to the manuals of the device to connect and the device driver.

Precautions When Using HDCP Content

The main unit supports HDCP. HDCP content from devices connected to the HDMI input
connectors on the rear panel of the main unit can be played. On the [Setting] screen >
[HDMI Input] page, place a check mark in [Enable HDCP] to view HDCP content on a
display. For details, refer to the Help Guide.
If a repeater device is connected to the HDMI output and DisplayPort output of the main
unit, HDCP content cannot be played. A black screen is displayed.
48

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vision exchange peq-c130

Table of Contents