Configure the active time and reboot time so that the update process or scan process cannot
start while Vision Exchange is running.
Running Windows Update
1.
Log in as the OS administrator.
2.
Open [Control Panel] > [System and Security] > [Administrative Tools] > [Services].
3.
Open [Properties] for the [Windows Update] service.
4.
Change the startup type to "Manual," and click the [Start] button.
5.
Select [Settings] > [Update & Security] from the Windows menu to perform the update.
6.
After updating is completed, open [Properties] for the [Windows Update] service, press
the [Stop] button, set the startup type to "Disabled," and press the [OK] button.
7.
Reboot the system.
Enabling Windows Defender
1.
Log in as the OS administrator.
2.
Select [Run...] from the Windows menu and run the "gpedit.msc" command to open the
local group policy editor.
3.
Open [Computer Configuration] > [Administrative Templates] > [Windows Components]
> [Windows Defender] > [Turn off Windows Defender] setting.
4.
Change the setting to [Not configured].
5.
Click the Settings icon in the Windows menu, select [Settings] > [Update & Security] >
[Windows Defender] and press the [Open Windows Defender] button to open the dialog
box.
6.
Click the [Turn on] button and configure settings as required.
Backup/Restore
Main Unit and Pods
Backing up/restoring settings
You can back up and restore configured settings using the [Administrator Menu] of Vision
Exchange.
Note
The followings in [Setting] of the [Administrator Menu] are not restored.
[Audio Device]
[Display]
[Network]
User settings of [Timezone setting] and [Set time manually] for [Clock]
57