External Microphone; Precautions When Building A Network; Ip Address Settings; Checking The Mac Address - Sony Vision Exchange PEQ-C100 System Integration & Services Manual

External microphone

An external microphone can be connected to the MIC-IN connector of the unit.
Note
To use a microphone connected to the unit, select the connected microphone in [Setting]
screen > [Audio Device] page > [Mic Setting].
This unit does not have audio signal processing functions, such as echo canceling or noise
canceling. Therefore, it is recommended to use a microphone/speaker with echo canceling and
noise canceling functions.

Precautions When Building a Network

IP address settings

To obtain an IP address, enable the DHCP server function on the router or other device, or

set a fixed IP address. For details about configuration, refer to the Help Guide.
The unit supports IPv4 only. IPv6 is not supported. Use in an IPv4 or IPv4/IPv6 dual stack

environment.
The unit does not feature a DHCP server function or NTP server function. These must be

prepared separately.
The unit does support the ping response function. To enable a ping response function to

acknowledge communications, log in as the OS administrator and then enable that
function. After checking communication, it is recommended to disable the function for
security reasons. For details about configuration, refer to a Windows manual.

Checking the MAC address

To check the MAC address of the unit, launch the Task Manager and then check using
Command Prompt or in the Control Panel.
For details about how to check, refer to a Windows manual.
Check procedure using Command Prompt
1. Launch the Task Manager.
For details, see "Launching the Task Manager" (page 59).
2. Click [File] > [New Task (Run...)].
3. Enter "cmd" in the displayed dialog box, and click the [OK] button.
The Command Prompt screen appears.
4. In Command Prompt, enter "ipconfig /all" and press the Enter key.
The MAC address is displayed on the Command Prompt screen.
51