Resetting The Vision Exchange Administrator Password - Sony Vision Exchange PEQ-C100 System Integration & Services Manual

12. Repeat steps 2 and 3 to display the BIOS screen.
13. Check that "Boot Option #1" in the [Boot] menu is set to "Windows Boot Manager." If it
isn't, reset it to "Windows Boot Manager."
14. Select "Save changes and reset" from the [Save & Exit] menu.
Pod
Refer to the Windows manual or computer manufacturer's manual, and follow the recovery
procedure.

Resetting the Vision Exchange administrator password

Main Unit and Pods
If you forget the Vision Exchange administrator password required to display the
[Administrator Menu] in Vision Exchange, you can use the following procedure to reset the
default password. However, the content on all settings screens in Vision Exchange, including
network settings, are also reset to the default settings, and must be reconfigured.
1. Launch the Task Manager.
For details, see "Launching the Task Manager" (page 59).
2. Click [File] > [New Task (Run...)], and enter and run "explorer".
3. Delete the following file.
C:\Sony\CollaborationSystem\Config\EULA.dat
4. Reboot the system.
The Administrator password and other settings are reset to their default values.
5. Display the Vision Exchange settings screen, and reconfigure the network and other
settings.
62