Huawei SmartLogger1000 User Manual page 45

SmartLogger1000
User Manual
LCD
Issue 04 (2013-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
3. Select a display language and then press
.
The pages will be displayed in the selected
language.
4. Set the correct date and time and then press
.
 To select the specific parameter, press
To set the parameter value, press
.
 The date and time are displayed in the
formats of YYYY-MM-DD and hh:mm:ss
respectively. YYYY stands for the year,
MM the month, DD the date, hh the hour,
mm the minute, and ss the second.
NOTICE
After the Time is successfully set, this time can be
synchronized in all the inverters connected to the
SmartLogger.
5. Set the Ethernet parameters and then press
.
The following Ethernet parameters are to be
set: IP address, Subnet mask, Gateway and
DNS.
6. Set the RS485 search address segment and
then press .
You need to set the search address segments
for RS485-1, RS485-2, and RS485-3
respectively.
5 System Operation
.
or
38