Setting Email Parameters - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
Figure 7-62 FTP

7.27 Setting Email Parameters

This topic describes how to set basic parameters of email and view the latest report status over
the WebUI.
The SmartLogger can send emails to inform users of the current energy yield information of
the power station system, alarm information, and equipment status, helping users to know the
running conditions of the power station system in time.
When using this function, ensure that the SmartLogger can be connected to the configured
email server and set the Ethernet parameters and email parameters of the SmartLogger.
On the Settings tab page, choose Extended Parameters > Email and set parameters in the
Basic Parameters, Yield, and Alarm areas and view the information in the Latest Report
Issue 04 (2013-12-15)

FTP Server can be set to the domain name or IP address of the FTP server.
If this parameter is set to the domain name of the FTP server, ensure that the address of the DNS
server is set properly.
 User Name and Password indicate the user name and password that need to be entered when you
log in to the FTP server.
 Under the default directory to which data is uploaded, you can set Remote Directory to create a
subdirectory with a name the same as the value of this parameter.
 You can click Start report test to check whether the SmartLogger can successfully report data to the
third-party EMS.
 You can enable or disable the data report function as required.

If you enable the data report function, you can choose to report data at regular intervals or at fixed
time.

Data reported on schedule is accumulated data, whose file name remains the same for a whole day.
You can choose Accumulated data or Periodically added data to be reported within a specified
cycle.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Web User Interface
143