Huawei SmartLogger1000 User Manual page 159

SmartLogger1000
User Manual
power output mode, select Disable active power reduction shown in
of the inverter will not be derated.
Figure 7-72 Disabling the active power reduction
Remote Control
The SmartLogger scans all the dry contact signals sent from the power dispatching related
devices (the wireless receiver controller or power carrier communications devices), analyzes
the valid command data identified by the inverters, and sends the data to all the inverters
connected to the SmartLogger.
Set Active Power Control Mode to Remote control, as shown in
Ensure that the SmartLogger is properly connected to the Ripple Control Receiver before you
set Active Power Control Mode to Remote control. For details, see
SmartLogger to a Ripple Control
Issue 04 (2013-12-15)
Receiver.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Web User Interface
Figure 7-72. The output
Figure 7-73.
4.5 Connecting the
152