Setting Plant Information - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
Figure 7-54 Date&Time




7.20 Setting Plant Information

This topic describes how to set plant information over the WebUI, including the plant name
and owner and address and nationality of the plant owner.
After you set the plant information, a plant configuration file can be generated. You can
upload this file to a third-party hosting website to implement remote monitoring.
On the Settings tab page, choose User Parameters > Plant and set Plant Name, Plant
Owner, Plant Owner Address, and Country, as shown in
limited permission, select the User name as Common User or Advanced User.
Issue 04 (2013-12-15)
Set Local time zone based on the location of the inverters and enable or disable DST as
required.
After Date&Time is successfully set, this time can be synchronized in all the inverters
connected to the SmartLogger.
Modification of Date&Time may affect the energy yield and performance data. Therefore,
change the time zone or system time with caution.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Web User Interface
Figure 7-55. Because of the
135