Huawei SmartLogger1000 User Manual page 41

SmartLogger1000
User Manual
When active power remote control and reactive power remote control are supported, only one
out of the four outputs of each ripple control receiver can be closed
Procedure
Step 1 Select a cable of appropriate length and connect one end of a cable to the ripple control
receiver.
Step 2 Connect the other end to the DI port in the SmartLogger. For details about the operation, see
Procedure in
To enable a normal power grid scheduling function, you need to set the corresponding
parameters (Active Power Control or Reactive Power Control) on the embedded WebUI. For
details, see
----End
Follow-up Procedure
Take operations in reversed order to disconnect the SmartLogger from the ripple control
receiver.
Issue 04 (2013-12-15)
4.2.1 Connecting the SmartLogger to the
7.29.1 Active Power Control
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SUN2000.
or 7.29.2 Reactive Power
4 Electrical Connections
Control.
34