Huawei SmartLogger1000 User Manual page 175

SmartLogger1000
User Manual
No.
7
8
Issue 04 (2013-12-15)
Symptom Possible Cause
disconnected.
2. The EMI is powered off.
3. The baud rate of the EMI is
inconsistent with that of the
SmartLogger.
4. Parameter settings of the
EMI are incorrect.
1. The SmartLogger is not
The
connected to the PC, or the
SmartLogger
cable between the
cannot
SmartLogger and the PC is
communicate
loose or disconnected.
with the
NetEco in the 2. Ethernet parameters are not
PC. properly set.
3. NetEco parameters are not
properly set.
1. The SmartLogger cannot
Emails cannot
communicate with the email
be received.
server.
2. Ethernet parameters are not
properly set.
3. Email parameters are not
properly set.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Maintenance
Measures
3. Verify the baud rate of the
EMI.
4. Log in to the WebUI and
verify the parameter
settings of the EMI.
1. Connect the Ethernet
network port of the
SmartLogger to the PC or
router.
2. Check that the Ethernet
parameters are correctly
set.
3. Check that the NetEco
parameters are correctly
set.
1. Connect the Ethernet
network port of the
SmartLogger to the PC or
router.
2. Check that the Ethernet
parameters are correctly
set.
3. Check that the Email
parameters are correctly
set.
168