Samsung DCS Programming Manual page 48

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 210
DESCRIPTION:
Allows the system administrator to set in the system features on a per-tenant basis listed below.
0. DISA PSWD
1. LCR ENABLE
2. PERI UCD SET
3. SMDI VMS SET
**4. DISA MOH
**5. SMDR MASK
**6. XFER MOH
**7. DSP SSPDNAME
**8. DDI FBACK→406
** New option as from SW Version V4.0
l
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
CUSTOMER ON/OFF PER TENANT
It toggles ON and OFF to decide whether outside customers are
required to enter DISA PASSCODE or not.
This will enable LCR feature to be worked in the system.
Periodic UCD Information provider.
Enables UCD Statistics data on a per UCD group basis to print
out on the IO port which has been set as SMDR or UCD REPT in
real time (every 10 seconds). This allows the information to be
interfaced with an extended manipulation by the external
package Software third-party provided.
Allows SMDI integration through RS-232 port for the external PC-
based VM system.
Gives an additional option to be presented to the outside DISA
callers
variable indication provided by MOH source instead of fixed DISA
dial tone.
Introduce a new programmable option to mask the last two digits of
the telephone number dialed on the SMDR printout.
Callers who have been transferred from an extension or ACD group
or AA group will hear MOH until answered by the called extension
instead of transfer dial tone.
LCD will display of programmed name of SYSTEM SPEED bin (in
MMC 706) if it has been programmed, otherwise show programmed
digits (in MMC 705) even though this MMC turned to ON.
Unanswered DDI call can be routed to an assigned destination in
MMC 406 before dropping out the call.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
PROGRAMMING
December 1996