Samsung DCS Programming Manual page 200

SAMSUNG DCS
TECHNICAL MANUAL(V4~)
6. OVERFLOW
7. DID CALL
8. MESSAGE CALL
7. CALL PROGRESS TONES
NOTE: Default data of call progress tones will automatically cleared once if
the SMDI VMS SET (MMC 210) is turned on.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
A
B
C
ACTION
1. Press TRSF 726
Display shows
2. Enter the OPTION number from above list (e.g., 4)
OR
Press UP or DOWN key to make selection
Press LEFT soft key to move cursor
3. Enter 1 for YES or 0 for NO
OR
Press UP or DOWN key for selection
Press RIGHT soft key to return to step 2
4. If option 0 is selected at step 2
5. If option 1 is selected at step 2
6. If option 2 is selected at step 2
A call has OVERFLOWED to the VM/AA port from a
station group.
A DID call has called the VM/AA port.
A message button or message reply feature code has
been used to call the VM/AA port.
DTMF digits can be sent in place of normal system
tones. Digits can be assigned to the following tones:
0. DIAL TONE
1. BUSY TONE
2. RNGBACK TONE
3. DND NO MORE
4. HDSET ANSWER
5. SPKER ANSWER
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used in some fields where a value is entered or deleted.
Used to input alpha character "A"
Used to insert alpha character "B"
Used to insert alpha character "C"
TONES
DISPLAY
EXT FOR DN1
YES
SEPERATOR
NO
SEPERATOR
YES
EXT FOR DN1
YES
TRK FOR DN1
YES
EXT FOR DN2
NO
PROGRAMMING
December 1996
VALUE
BA
4
5
6
3
2
99-3-5