Samsung DCS Programming Manual page 43

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 205
BELL
DESCRIPTION:
Designates the station that controls the loud bell ring output of a Trunk A card. Each Trunk A card
has one loud bell output; these outputs are given a DN of 3901–3920 as a default value to enable
them to be assigned.
The loud bell will follow the ring cadence of the designated station. Only a station can be
assigned to control the loud bell; a station group cannot be assigned.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 205
Display shows current setting
2. Dial loud bell number (e.g., 3902)
OR
Use UP or DOWN to scroll through loud bell
numbers and press RIGHT soft key to move the cursor
3. Enter station number (e.g., 201)
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: UNASSIGNED
RELATED ITEMS: NONE
Note: This MMC is not applicable to DCS/Compact System
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Clears previous entry
ASSIGN LOUD
DISPLAY
[3901] LOUD BELL
RING PAIR : NONE
[3902] LOUD BELL
RING PAIR : NONE
[3902] LOUD BELL
RING PAIR :201
PROGRAMMING
December 1996