Samsung DCS Programming Manual page 237

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 810
DESCRIPTION:
Used only in the event that all data processing is needed to be stopped either in a single cabinet or
the entire system.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ANS/RLS
ACTION
1. Press TRSF 810
Display shows
2a. Enter in cabinet selection via dial keypad
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to advance cursor
2b. Press ANS/RLS to select all cabinets and all slots
3. Enter in slot number via dial keypad
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to advance cursor
4. Enter in 1 for HALT or 0 to PROC
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to enter data and return
to step 2
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: NONE
RELATED ITEMS: NONE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to select ALL
HALT PROCESSING
DISPLAY
HALT/PROCESSING
C:ALL S:ALL→PROC
HALT/PROCESSING
C:3 S:ALL→PROC
HALT/PROCESSING
C:ALL S:ALL→PROC
HALT/PROCESSING
C:3 S:5
HALT/PROCESSING
C:3 S:5
PROGRAMMING
December 1996
→PROC
→HALT