Samsung DCS Programming Manual page 39

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 201 CHANGE CUSTOMER PASSCODE
DESCRIPTION:
Used to change the passcode allowing access to MMC 200 Open Customer Programming from
its current value.
NOTE: The passcode is four digits long. Each digit can be 0 ~ 9. The current (old) passcode is
required for this MMC.
PROGRAM KEYS
KEYPAD
SPK
ACTION
1. Press TRSF 201
2. Enter new passcode via key dial pad (maximum four
digits)
3. Verify new passcode via key dial pad
PASSCODE verified
OR
PASSCODE failure
Return to step 2
4. Press TRSF to store and exit
OR
Press SPK to store and advance to
next MMC
DEFAULT DATA: PASSCODE = 1234
RELATED ITEMS: MMC 200 OPEN CUSTOMER PROGRAMMING
Used to enter passcodes
Save data and advance to next MMC
PROGRAMMING
December 1996
DISPLAY
CUST. PASSCODE
NEW CODE:_
CUST. PASSCODE
NEW CODE: QQQQ
CUST. PASSCODE
VERIFY : QQQQ
CUST. PASSCODE
VERIFY :SUCCESS
CUST. PASSCODE
VERIFY :FAILURE