Samsung DCS Programming Manual page 213

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 737
DESCRIPTION:
This MMC737 DECT SYSTEM CODE will be used for control the codes of DECT systems which
made by SAMSUNG. This MMC is composed of two fields(SYSTEM ID and AUTH CODE).
SYSTEM ID is composed of 3-hexadecimal digits(range : 011 ~ FFF) to distinguish between
SAMSUNG DCS Key Systems(DECT). This SYSTEM ID code will be provided by SAMSUNG per
DCS key system and the code is unique. The dealer or installer of SAMSUNG DECT system must
program this unique SYSTEM ID value using this MMC when DECT system is installed at the sites.
Whenever DECT system installer wants to register DECT handset, installer must input the
AUTH(Authentication) Code that DECT system has. At this time DCS key system compares that
Authentication Code is same or not. If the system code is same as DECT system has, DECT
system continues the registration procedures. Otherwise DECT system rejects registration
procedure. Authentication Code is organized 4-hexadecimal digits(0000 through 9999; default
value is 1590).
After the registration of DECT handsets is completed using this MMC, the Codes(SYSTEM ID and
AUTH CODE) should not be changed to avoid modification of Data Base for DECT registration
information.
NOTE : The SYSTEM ID value must be greater than 011.( SYSTEM ID range : 011 ~ FFF)
If a system installer wants to register DECT handset, the installer must change the
SYSTEM ID that has range from 011 to FFF.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 737
Display shows
2. Press the Right soft key to move the cursor
and Enter the AUTHrization CODE via Dial Key pad.
DECT SYSTEM CODE
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
PROGRAMMING
DISPLAY
DECT SYSTEM CODE
AUTH CODE : FFFF
DECT SYSTEM CODE
AUTH CODE : 1234
JUNE 1997