Other Messages - Sony UP-DF550 Manual

b) "XXXXX" indicates the position where trouble has occurred.
For detailed information on the position, see "If the Film
Sheets Jams" on page 41."
c) "nn" indicates the number of the symbol displayed in the
actual message.

Other Messages

When the following message appears, the ALARM
indicator does not light. The PRINT indicator blinks.
Messages Possible causes and remedies
HEAD IN COOLING The thermal head has overheated.
PLEASE WAIT tLeave the unit until the head has
cools down and this message
disappears. During continuous
printing, the unit starts printing
after this message disappears.
HEAD IN HEATING The thermal head is warming up.
PLEASE WAIT tLeave the unit until the head has
warms up and this message
disappears. The unit starts printing
after this message disappears.
PLEASE WAIT The unit is returning to the initial
settings to restart printing after closing
the covers which opened for removing
jammed film or cleaning.
tLeave the unit until this message
disappears. When this message
appears, the PRINT indicator does
not blink.
PROCESSING The image data is being processed.
RESERVED
POWER OFF The unit is getting ready for shutting
PLEASE WAIT down the power.
Troubleshooting
If Damage is Suspected
If a problem appears, check the following trouble
shooting guide first and perform whatever action is
recommended to solve the problem. If the problem
persists, turn off the printer and consult your Sony
dealer.
Symptom Possible causes and remedies
Nothing appears on • The
the LCD. the front panel of the unit is not
pressed.
tPress the
• The connections may not be
correct.
tMake the connections correctly.
?/a
The unit has not The
turned on even though rear panel is not set to on (
1ON/
tSet the
the
STANDBY
switch the rear panel to on (
on the front panel is (Page 18)
pressed.
1ON/
The Set the
STANDBY a
switch ( ) once, then set the
does not work. power switch to on (
1ON/STANDBY
not work, turn the power off and
contact you Sony dealer.
The unit does not An error message appears on the
print. window display.
tTake the measures recommended in
"Messages". (page 40)
If the Film Sheets Jams
If the film jams before printing starts or during printing,
printing stops and the following messages appear on the
LCD.
An error message indicates the position where the film
has jammed. Check the position and follow the steps
below to remove the jammed film.
After the jammed film has been removed, the unit starts
printing if there is image data still to be printed.
• REMOVE FILM TRAY 1
• REMOVE FILM TRAY 2
• REMOVE FILM REAR 1 OR 2
• REMOVE FILM TOP
• REMOVE FILM FRONT
• REMOVE FILM TOP & INNER 1
• REMOVE FILM TOP & INNER 2
• REMOVE FILM OUTPUT TRAY
• REMOVE FILM SOME PLACES
1ON/STANDBY
switch on
1ON/STANDBY
switch to turn the unit on.
(Page 18)
(Page 17)
main power switch on the
?
).
?/a
main power switch on
?
).
?/a
main power switch to off
?/a
main
?
) again. If the
switch still does
Troubleshooting
41