Placing The Unit - Sony UP-DF550 Manual

Notes
• Printouts are ejected onto this output tray from tray 2.
This output tray is reserved for use with UPT-514BL
film sheets. You must attach a stopper to use UPT-
512BL or UPT-510BL film sheets. To use UPT-512BL
or UPT-510BL film sheets, consult your Sony dealer
for details on how to attach the stopper.
• Be sure to insert the output tray all the way into the
unit. If you do not, the message "SET OUTPUT
TRAY" appears when you start printing and the
printer will not continue the printing operation.
16

Placing the Unit

Placing the Unit
You can place the unit horizontally or vertically.
Casters (sold separately) are necessary for vertical
placement. Contact your nearest Sony dealer before
using casters.
When placing the unit horizontally
To maintain performance, adequate space is needed for
ventilation. Also, to remove jammed film, space of
about 7 cm (2 7/8 inches) towards the back and about 26
cm (10 1/4 inches) over the top of the unit are required.
21 cm
(8 3/8 inches)
When placing the unit vertically
You can place the unit vertically by attaching casters
(sold separately). This is convenient for placing the unit
under a desk, and for pulling it out easily.
26 cm
(10 1/4 inches)
7 cm
(2 7/8 inches)