Mount The Tire - Bosch TCE 260 Operation Manual

en 16 | TCE 260 | Operation
Move out the tire
R
Keep the horizontal arm backward and move the tire.
|
1 987 AT7 374 2015-09-02
6.9

Mount the tire

1. Selection the tire
$
Before select the tire, you should know the tech-
nical feature, technical parameter, characteristic
and safe grade of the tire. The related information
is marked on the side wall of the tire.
Note
$
Before mount the tire, please change the core of
the nozzle to be the nozzle of tubeless tire.
Note
$
Confirm whether the related parameter of the tire
matches the parameter of the rim or not. And also
make sure the rim is not deformed and the center
hole not damaged. While you should also secure
that the surface of the rim without the phenome-
non of rusty and broken and there is not any bur
at the nozzle.
$
Confirm the tire is under perfect condition and
without any damage.
2. Prepare the tire
$
Lubricate the bead with the special tire grease.
$
Place the tire on the rim with the tilt angle of 45
degree.
Robert Bosch GmbH