Kinematic Transformation (M1)
7.2 TRANSMIT
7.2
TRANSMIT
Note
The TRANSMIT transformation described below requires that unique names are assigned to
machine axes, channel and geometry axes when the transformation is active.
See
MD10000 $MN_AXCONF_MACHAX_NAME_TAB,
MD20080 $MC_AXCONF_CHANAX_NAME_TAB,
MD20060 $MC_AXCONF_GEOAX_NAME_TAB.
Besides this, no unequivocal assignments exist.
Task specification
Complete machining, see diagram:
Figure 7-1
Legend:
CM: Rotary axis (Main spindle)
ASM: Work spindle (miller, drill)
X, Y, Z: Cartesian coordinate system for programming of face-end machining (origin at the
rotation center of the face)
ZM: Machine axis (linear)
XM: Machine axis (linear)
486
End face machining of turned part
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Extended Functions