Example Of Writing Online Tool Offset Continuously - Siemens SINUMERIK 840D sl Function Manual

Note
Command FTOCON must be written to the channel in which the offset is to be applied
(machining channel for grinding operation).
FTOCOF always corresponds to the reset position. PUTFTOC commands are effective only
when the part program and FTOCON command are active.
18.3.4

Example of writing online tool offset continuously

Surface grinding machine
Y:
V:
X:
Plane for the tool offset: G19 (Y/Z plane)
Length 1 acts in Z, length 2 in Y, tool type = 401
Machining:
Dressing:
Extended Functions
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
Infeed axis for grinding wheel
Infeed axis for dressing roller
Reciprocating axis, left - right
Channel 1 with axes Y, X
Channel 2 with axis V
Grinding-specific tool offset and tool monitoring (W4)
18.3 Online tool offset
983