Siemens SINUMERIK 840D Description Of Functions page 300

5 Commissioning
5.5 Diagnostics
065...128
129...192
193...256
257...320
Definition of the The file, in which the extended texts are defined, is also declared in the
extended text configuration file for the alarm server (file MBDDE-INI) in the section
[IndexTextFiles]
File excerpt: mbdde.ini
[IndexTextfiles]
ALSI=f:\dh\mb.dir\alsi_
We recommend that this file for the extended text is located in the HMI user
directory.
Every parameter can be assigned a dedicated text in this file, whereby the text
entry is located in front of the associated parameter value (refer to the following
file excerpt).
File excerpt: alsi_gr.com
000000 0 0 "Parametrierfehler MD11500/DB18.DBX36.0 bzw.
000001 0 0 "Anwendertext $A_INSE(P)[01]"
..
000064 0 0 "Anwendertext $A_INSE(P)[64]"
000065 0 0 "Anwendertext $A_OUTSE(P)[01]"
..
000128 0 0 "Anwendertext $A_OUTSE(P)[64]"
000129 0 0 "Anwendertext $A_INSI(P)[01]"
000192 0 0 "Anwendertext $A_INSI(P)[64]"
5-300
SINUMERIK 840D/SIMODRIVE 611 digital SINUMERIK Safety Integrated (FBSI) - Edition 11.03
occurs between $A_INSE and $A_INSEP. The index value then
results from a channel error signaled from the PROFIsafe module
(Alarm 27254) that is assigned the appropriate $A_INSE(P)
variable (e.g. discrepancy error)
Error in the system variables $A_OUTSE(P)[01...64] (Alarm
27090 / Alarm 27254)
If the safety-related output signal is output at a PROFIsafe
module, then only a safe signal state is transferred. This means,
Alarm 27090 signals an internal logic error ($A_OUTSE(P)-
variables differ) and Alarm 27254 signals a channel error
signaled from the PROFIsafe module that is assigned to the
appropriate $A_OUTSE(P) variable (e.g. short-circuit fault)
Error in system variables $A_INSI(P)[01...64]
(only Alarm 27090)
Error in system variables $A_OUTSI(P)[01...64]
(only Alarm 27090)
Error in system variables $A_MARKERS(P)[01...64]
(only Alarm 27090)
; Example : Standard entry
MD10097/DB18.DBX36.1"
© Siemens AG 2003 All Rights Reserved
11.03