Using The Switch Module Cli To Collect Fc Switching Plane Information (Mx210/Mx220) - Huawei E9000 Troubleshooting Manual

Huawei Servers
Troubleshooting
Figure 4-4 Collecting information
----End
4.4.2.7 Using the Switch Module CLI to Collect FC Switching Plane
Information (MX210/MX220)
Operation Scenario
Use the CLI of a switch module (MX210/MX220) to collect FC switching plane
information.
This section applies to the CX210, CX220, CX912, and CX916. The FC switching
planes of the CX210 and CX912 are the MX210, and those of the CX220 and
CX916 are the MX220.
Prerequisites
Conditions
●
●
Data
Table 4-9 Data list
Parameter
IP address
Subnet mask
Default gateway
Issue 20 (2020-09-25)
– If you press Enter when the CLI prompts you to specify the directory for
storing the dump file, the dump file is automatically downloaded to the
default directory on the SFTP server.
The PC has been connected to the management network port of the server by
using a network cable.
The mini-sftp-server.exe software has been obtained.
Copyright © Huawei Technologies Co., Ltd.
Example Value
10.77.77.77
255.255.255.0
0.0.0.0
4 Collecting Information
32