Logging In To The Rmc Cli - Huawei E9000 Troubleshooting Manual

Huawei Servers
Troubleshooting
3.

8.14 Logging In to the RMC CLI

Operation Scenario
Log in to the rack management controller (RMC) CLI.
Two login methods are available:
●
●
Prerequisites
The RMC is operating properly.
Issue 20 (2020-09-25)
– Parity: None
– Stop bits: 1
– Flow control: None
Figure 8-35 lists the parameters to be specified.
Figure 8-35 HyperTerminal properties
Enter the username and password after the connection is established.
SSH
SSH provides secure remote login and other secure network services over an
insecure network.
To log in to the RMC CLI over SSH, connect a PC to the RMC management
network port by using a network cable.
Login over the local serial port
Copyright © Huawei Technologies Co., Ltd.
8 Common Operations
159