Huawei E9000 Troubleshooting Manual page 164

Huawei Servers
Troubleshooting
Figure 8-32 Network connections
Step 2 Set an IP address and a subnet mask or add route information for the PC so that
the PC can communicate with FusionDirector.
Step 3 Open the browser, enter https://
Step 4 Enter the login information.
Table 8-5
Issue 20 (2020-09-25)
NO TE
ipaddr indicates the address used to access the FusionDirector WebUI. It can be in either
●
of the following formats:
– IPv4 address in dotted-decimal format
– Fully qualified domain name (FQDN) of FusionDirector.
● The browser may display a message indicating that the website has a security certificate
error. Ignore this error and continue the login if the IP address is correct.
describes the information required on the login page.
Copyright © Huawei Technologies Co., Ltd.
ipaddr in the address box, and press Enter.
XXX.XXX.XXX.XXX .
8 Common Operations
155