ABB ACS560 Quick Installation And Start-Up Manual page 16

16 EN - Quick installation and start-up guide
EN
84 Electrical installation
HI
5. Connect the input power cable as follows:
• Ground the shield 360° by tightening the clamp of the power cable grounding shelf
5. Connect the input power cable as follows:
onto the stripped part of the cable (6a).
• Ground the shield 360 degrees by tightening the clamp of the power cable
• Connect the twisted shield of the cable to the grounding terminal (6b).
grounding shelf onto the stripped part of the cable (6a).
• Connect the phase conductors of the cable to the terminals of L1, L2 and L3.
• Connect the twisted shield of the cable to the grounding terminal (6b).
• Tighten the screws to the torque given below.
• Connect the phase conductors of the cable to the terminals of L1, L2 and L3.
• Tighten the screws to the torque given below.
Frame size
Frame size
L1. L2. L3
L1, L2, L3
6c
6b
6a
6. For R3, connect cable by the motor cable method mentioned instep 3.
6. Connect cable by the motor cable method mentioned in step 3.
7. Ground the shield 360 degrees (7a).
7. Ground the shield 360° (7a).
8. Connect the twisted shield to the grounding terminal (7b).
8. Connect the twisted shield to the grounding terminal (7b).
9. Connect the conductors to the R+ and R- terminals (7c).
10. Tighten to the torque given below.
Frame size
R+. R-
PE
PE
R3
N·m
2.5...4.5 1.8...3.3
R3
N·m
2.5...4.5 1.8...3.3
R3
R4
N·m lbf·ft
lbf·ft N·m lbf·ft
4.0 3.0
2.5...4.5 1.8...3.3
lbf·ft
R4
N·m lbf·ft
4.0 3.0