Mitsubishi Electric MELSEC-F FX3G Series User Manual page 430

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
Date
9/2013
4/2015
11/2015
2/2018
1/2020
424
Revision
J • The following products are added:
- Expansion board
FX -4EX-BD, FX
3G
- Special adapter
FX -ENET-ADP
3U
• Ver. 1.30 is supported:
- Supports the MODBUS communication function
- Special device and special data register of MODBUS communication is added
(Appendix A)
- One instruction is added (Appendix B-3)
• Ver. 2.00 is supported:
- Special auxiliary relay and special data register of FX
(Appendix A)
• Ver. 2.10 is supported:
- Supports the IP address change function of FX3U-ENET-ADP
• Ver. 2.20 is supported:
- Special auxiliary relay of FX
• Description of the programming tool is changed accompanied by change of the
programming tool from GX Developer to GX Works2.
• Errors are corrected
K • A part of the cover design is changed.
L • The following products is added:
- Special function block
FX -128ASL-M
3U
• Maximum number of input/output points when AnyWireASLINK master is used
(Section 6.3)
• The contents of warranty are changed.
• Errors are corrected
M • The contents of standards are changed.
N • The following products is added:
- Special function block
FX -32DP
3U
• Errors are corrected
Description
-2EYT-BD, FX -485-BD-RJ
3G 3G
-4EX-BD, FX
3G 3G
Revised History
-ENET-ADP is added
3U
-2EYT-BD is added (Appendix A)