Removal; Removal (When The Expansion Board/Connector Conversion Adapter Are Not Used Together) - Mitsubishi Electric MELSEC-F FX3G Series User Manual

FX Series Programmable Controllers
3G
User's Manual - Hardware Edition
21.4

Removal

Be sure that the power is OFF when removing the memory cassette.
21.4.1 Removal
(when the expansion board/connector conversion adapter are not used together)
The FX -40MT/ES is used as the main unit in this example.
3G
1
Raise the memory cassette detachment lever.
Raise the memory cassette detachment lever ("A").
2
Remove the tapping screws (B in the right fig-
ure) which fix the memory cassette.
Proceed to the step 3 when the memory cassette is not fixed
with tapping screws.
3
Grasp the detachment lever and pull it.
Grasp the detachment lever ("C") and pull it vertically to
remove the memory cassette.
4
Remove the side cover.
Remove the side cover (D in the right figure) as shown in the
right figure.
Caution:
The side cover is not attached when the memory cassette is
installed under the top cover (S) of a 40/60-point type main unit.
5
Attach the top cover.
Attach the top cover (E in the right figure) as shown in the right
figure.
21 Memory Cassette
21.4 Removal
A
1
B
C
3
D
4
E
383
21
22
A
B
C
D
E