10.1.1.1
Transceiver Status and Alarm LEDs
The Status LED is green, and the Alarm LED is red. These LEDs are either off, on, or blinking
depending on the condition of the transceiver.
Table 61: Transceiver Status and Alarm LEDs
Condition
No Power
Lamp Test (During
Test)
Impaired Operation
Critical Failure
Booting Up
Operational
For detailed information on current operation and fault status, use the Configuration/Service Software
(CSS) Status Panel screen.
10.1.1.2
Transceiver Ethernet Link Status LEDs
The following LEDs indicate Ethernet link and status connections between the transceiver, LAN, and
the front panel service port.
Table 62: Transceiver Ethernet Link Status LEDs
LED Name
ENET SC-A (external con-
nection to SITE CTRL A on
the rear of the chassis)
ENET SCB (external con-
nection to SITE CTRL B on
the rear of the chassis)
ENET SVC (front panel
service port)
Green (Status LED)
Off
On
On
Off
Blinking
On
Ethernet link inactive (Remote PHY/MAC not de-
tected.)
Ethernet link established (Remote PHY/MAC de-
tected and auto-negotiation completed.)
GTR 8000 Base Radio Ethernet link active (Ac-
tively transmitting or receiving data.)
Ethernet link inactive (Remote PHY/MAC not de-
tected.)
Ethernet link established (Remote PHY/MAC de-
tected and auto-negotiation completed.)
GTR 8000 Base Radio Ethernet link active (Ac-
tively transmitting or receiving data.)
Ethernet link inactive (Remote PHY/MAC not de-
tected.)
Ethernet link established (Remote PHY/MAC de-
tected and auto-negotiation completed.)
GTR 8000 Base Radio Ethernet link active (Ac-
tively transmitting or receiving data.)
Chapter 10: GTR 8000 Base Radio Reference
Red (Alarm LED)
Off
On
Blinking
On
Off
Off
Indication
MN003286A01-E
LED Status
Off
Green
Amber (blink-
ing)
Off
Green
Amber (blink-
ing)
Off
Green
Amber (blink-
ing)
265