MN003286A01-E
Chapter 3: GTR 8000 Base Radio Installation
3.3.11
Networking Tools
Use the following networking tools for installing and servicing the network:
•
Fluke
®
OneTouch Assistant LAN tester
•
NiMH rechargeable battery for Fluke
•
T1/E1 or E1 test set (such as the Hewlett-Packard
•
Serialtest
®
software with the ComProbe
3.3.12
General Installation/Troubleshooting Tools
If information is needed regarding where to obtain any of the equipment and tools listed, contact the
Motorola Solutions Support Center (SSC). See
3.3.12.1
General Tools
Use the following general tools to install, optimize, and service equipment in the system:
•
150 MHz 4 Channel Digital Storage Oscilloscope
•
Transmission Test Set (TIMS Set)
•
Aeroflex 3900 Series Service Monitor or equivalent
•
50 Ohm Terminated Load
•
Digital Multimeter (DMM)
•
Terminal Emulation Software
•
DB-9 Straight through serial cable
•
RS-232 Cables with Connectors
•
Punch Block Impact Tool
•
MODAPT – RJ-45 Breakout Box
•
Remote RJ-11/ RJ-45 Cable Tester (1200 ft length maximum)
•
PC Cable Tester (RG-58, 59, 62, BNC, RJ-45, RJ-11, DB-9, DB-15, DB-25, Centronics 36-pin
connectors)
•
ESD field service kit
•
Amprobe Instruments GP-1 Earth Tester
•
AEMC 3730 Clamp-on Ground Resistance Tester
3.3.12.2
Rack Tools
Use the following tools to install, optimize, and service the equipment:
•
Service Monitor: Aeroflex 3900 Series Service Monitor with P25 Options installed (plus High
Performance Data (HPD) and Time Division Multiple Access (TDMA) options as required)
•
Personal Computer meeting the following specifications:
-
Operating Systems:
92
®
HP37702A)
®
and SerialBERT option
Motorola Solutions Support Center on page
219.