Motorola ASTRO 25 GTR 8000 Manual page 234

MN003286A01-E
Chapter 9: GTR 8000 Base Radio FRU Procedures
CAUTION: Load the correct version of the software. A mismatch in software versions
may occur when replacing the transceiver module with an on-hand spare. A mismatch in
software versions may cause all base radios to go into a configuration mode of operation
with a reason of 'Invalid Software Version'. To exit the base radio from the configuration
mode, see CSS Procedures → Changing from Configuration to Normal Mode in the
CSS Online Help.
a From the Advanced Options menu, select the transfer type.
b From the menu, select File → File Manager.
The Software Depot File Manager opens.
c From the menu, select Component Operations → Import Fileset.
The Import a Fileset Into the Software Depot dialog box appears.
d Click Browse and search for the swdlv3.cfg file, or follow path: E:\swdl\swdlv1.cfg or
swdlv3.cfg. Click Open.
The file appears in the Configuration File Path field of the dialog box.
e Click Generate. Click OK.
The Import a Fileset Into the Software Depot dialog box closes and the software
component appears in the Components In the Software Depot list of the Software Depot
File Manager window.
f Exit the Software Depot File Manager.
21 For a conventional or trunked 3600 device, perform a single device software download to
transfer and install the latest base radio software using Software Download Manager as follows:
a Click Open Single Device Mode.
b Enter the <IP address> of the device. Click Connect.
If the device supports SNMPv3, a Security Level screen appears.
c Enter the Authentication Password and Encryption Password, if the chosen security level
required inserting these credentials. Click OK.
d In the Select an option drop down list, select Upgrade.
e In the Operation Type field, select Transfer and Install.
f In the Application Type drop down list, select the application to install.
g In the Software Version drop down list, select the appropriate software version.
h In the Bank Selection drop down list, select the bank to receive the software. Select
Automatic to store the software in the bank that is more suitable for the device.
i Select Start Operation.
j In the window that appears, click Proceed.
If the transfer was successful, the progress bar in the Operation Status tab displays green.
If the transfer failed, the progress bar displays red.
22 Perform a site software download and installation for a trunked ASTRO
NOTICE: A site software download is not available for conventional or trunked 3600
devices.
234
® 25 base radio.