5.10.4.5
VHF Duplexer Low Notch Loop Assemblies Tuning Set Up
Figure 65: Test Equipment Set Up for Tuning VHF Duplexer Low Notch Loop Assemblies
5.10.4.5.1
Tuning VHF Duplexer Low Notch Loop Assemblies
Procedure:
1 Set up test equipment as shown in
Low Notch Loop Assemblies on page
2 Using the tuning tool, adjust trimmer screws for cavity # 4 to obtain minimum reading on
millivoltmeter. (Adjust trimmer screw to obtain minimum. Reduce the range on the millivoltmeter
as necessary to reach true minimum reading.)
3 Repeat steps 1 and 2 for cavities 5 and 6.
Chapter 5: GTR 8000 Base Radio Optimization
Figure 65: Test Equipment Set Up for Tuning VHF Duplexer
171.
MN003286A01-E
171