Huawei USG6000 Series Hardware Manual page 252

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Figure 3-12 Removing the fan module
Step 3 Install a new fan module.
Hold the handler of the fan module with one hand and the bottom of the fan module with the
other hand, insert the fan module along the guide rail of the fan slot until the back of the fan
module gets in good contact with the chassis backplane, and use the Phillips screwdriver to
fasten the screw on the fan module.
Issue 03 (2015-01-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Maintaining the Hardware
242