4Ge-Bypass Wsic Card - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Table 1-68 Attributes of ports on the 8GEF card
Attribute
Connector type
Cable
Working mode
Rate
Port standard
Frame format
Network protocol
Technical Specifications
Table 1-69
Table 1-69 Technical specifications of the 8GEF card
Item
Model
Silkscreen
Dimensions (H x W x D)
Weight
Power
Available slot

1.4.4 4GE-BYPASS WSIC Card

This card provides two electrical bypass links. When the USG is powered off or faulty, the
traffic bypasses the USG for a direction connection between the upstream and downstream
devices of the USG, ensuring service continuity.
The 4GE-BYPASS card provides four GE RJ45 ports that form two bypass port pairs. Each
bypass port pair forms an electrical link bypass while both the member ports work at Layer 2.
The Layer 2 electrical link bypass works in either of the following states:


Issue 03 (2015-01-26)
lists the technical specifications of the 8GEF card.
Working state
The USG runs properly. The data flows along Layer 2 links enter the USG for security
service processing.
Protection state
When the USG is powered off or becomes faulty, the data on Layer 2 links bypasses the
USG and is transmitted between the upstream and downstream devices, ensuring
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
SFP
Optical fiber (The port requires a gigabit optical transceiver.)
Full duplex
1000 Mbit/s
IEEE 802.2/802.3
Ethernet_II
TCP/IP
Description
WSIC-8GEF
8GEF
19.82 mm x 201.00 mm × 230.00 mm
0.5 kg
13.5 W
WSIC or lower part of the XSIC slot
1 Hardware Overview
151