Advertisement
Quick Links
HUAWEI USG6305/6305-W/6310S/6310S-W/6310S-WL-OVS/6510/6510-WL
V500R001
Quick Start
Issue: 02
Date: 2017-06-15
Thank you for using Huawei USG6305/6305-W/6310S/6310S-W/6310S-WL-OVS/6510/6510-WL products. This USG prod-
uct series protects your network against Internet threats. This Quick Start shows the product appearance and provides the
essential information required for installing the device and setting up Internet access. For detailed hardware description and
installation guidelines, refer to the
Safety Precautions
Be aware of the following safety precautions when installing the device.
• Deactivate power whenever possible before performing maintenance on power cables.
• Always wear a properly-grounded wrist strap before touching the device or expansion cards in it.
Device and Accessories
Your product package includes the following items:
LTE
indicators
Secospace USG6000
LTE
3G/2G
PWR SYS ALM USB
micro
SD
WiFi indicators
System Indicators
SN label (including the
Console port
SN and product model)
Secospace USG6000
LTE DIV
WiFi 0
micro SD
XXXXXXXXXXXXXXXXXXXXXXXXXXX
LTE antenna
USB
connector
SIM card slot
Micro SD card slot
• In the figure, the USG6310S-WL-OVS/6510-WL that support Ethernet, WiFi, and LET access are used as an example.
• The USG6305/6310S/6510 support only Ethernet access. The USG6305 has four 10/100/1000M autosensing Ethernet
electrical interfaces, and the USG6310S/6510 have eight Ethernet electrical interfaces.
• The USG6305-W/6310S-W support Ethernet and WiFi access. The USG6305-W has four 10/100/1000M autosensing
Ethernet electrical interfaces, and the USG6310S-W has eight Ethernet electrical interfaces.
• All models support 4G access by inserting a 4G LTE data card in the USB slot.
• The rack-mounting ears are optional.
Hardware Guide
. For detailed configurations, refer to the
WLAN
0
1
2
3
4
5
6
7
WWAN
2.4G
5G
ETH
Port indicators
WiFi antenna connector
Protection ground
terminal
1
3
5
7
WiFi 1
0
2
4
6
CONSOLE
10/100/1000M autosensing
Ethernet electrical interface
Reset button
Rack-mounting ears
M4 screw
LTE MAIN
RST
12V ; 2A
Power
24W power adapter
Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.
1
All other trademarks and trade names mentioned in this document are the
property of their respective holders.
Administrator Guide
.
Rubber feet
Quick start
M6 screw
Power cable
retention clip
PGND cable
LTE antenna
WiFi antenna
Advertisement
Related Manuals for Huawei USG6305
Summary of Contents for Huawei USG6305
- Page 1 • In the figure, the USG6310S-WL-OVS/6510-WL that support Ethernet, WiFi, and LET access are used as an example. • The USG6305/6310S/6510 support only Ethernet access. The USG6305 has four 10/100/1000M autosensing Ethernet electrical interfaces, and the USG6310S/6510 have eight Ethernet electrical interfaces.
-
Page 2: Default Configuration
Cabling • The USG6310S-WL-OVS supports 4G LTE, 3G UMTS, and 2G GSM SIM cards. The USG6510-WL supports 4G FDD LTE/TDD LTE, 3G TD-SCDMA/WCDMA, and 2G GSM SIM cards. • SIM cards are not hot swappable. • You are advised to place the LTE antenna at least 1.2 m away from the WiFi antenna. 1. Connect the ground terminal on the device to the ground bar using a PGND cable. 2. Internet connection: Connect GE0/0/4 to the Internet using a network cable, or install a SIM card and LTE antennas to connect to the Internet in 4G mode. - Page 3 Item Port Description GE0/0/4 WAN Mode Static IP IP Address: 1.1.1.1 Request your ISP or network administrator Subnet Mask: 255.255.255.0 to provide the data. Default Gateway: 1.1.1.254 Primary DNS: 2.2.2.2 (Optional) Secondary DNS: 2.2.3.3 PPPoE User name/Password: user/Password123 DHCP The device functions as a DHCP client.
- Page 4 8. In the LAN Settings step, set the parameters and click Next. 9. (Optional) In the LAN DHCP Settings step, set the parameters and click Next.
-
Page 5: Activating Licenses
10. (Optional) In the Configure WLAN step, set the parameters and click Next. Click New interface in VLAN Interface, create interface VLANIF10, set the interface IP address to 10.1.0.1, and set the security zone to trust. 11. (Optional) In the Configure DHCP Service on WLAN step, set the parameters and click Next. 12. -
Page 6: Open Source Software Notice
• Declaration of Conformity Hereby, Huawei Technologies Co., Ltd. declares that the radio equipment type is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.huawei.com/en/product-certification...