Huawei USG6000 Series Hardware Manual page 159

HUAWEI USG6000 Unified Security Gateway
Hardware Guide
Name
ACT indicator (yellow)
Indicator 0 (green)
Indicator 1 (green)
Port Description
Table 1-66
Table 1-66 Attributes of ports on the 2XG8GE card
Name
8 x gigabit RJ45 port
2 x 10-gigabit SFP+ port
Issue 03 (2015-01-26)
Description
 Off: The link is disconnected.
 Blink: Data is being sent or received.
 Off: No data is being sent or received.
 Steady on: The link of SFP+ port 0 is connected.

Blink: Data is being sent or received through SFP+ port 0.
 Off: The link of SFP+ port 0 is disconnected.
 Steady on: The link of SFP+ port 1 is connected.
 Blink: Data is being sent or received through SFP+ port 1.
 Off: The link of SFP+ port 1 is disconnected.
lists the attributes of ports on the 2XG8GE card.
Attribute
Connector type
Cable
Working mode
Rate
Port standard
Frame format
Network protocol
Connector type
Port cable
Working mode
Rate
Port standard
Frame format
Network protocol
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Hardware Overview
Description
RJ45
Standard Ethernet cable
Full-duplex/Half-duplex
10/100/1000 Mbit/s
autosensing
IEEE 802.2/802.3
Ethernet_II
TCP/IP
SFP+
Optical fiber (The port
requires a 10-gigabit optical
transceiver.)
Full duplex
10 Gbit/s
IEEE 802.3ae
Ethernet_II
TCP/IP
149