HUAWEI USG6000 Unified Security Gateway
Hardware Guide
1.
2.
3.
1.
2.
3.
Issue 03 (2015-01-26)
Windows XP
Start the HyperTerminal (Windows operating system) or other third-party program that
supports serial ports on the PC.
Create a connection, select the serial port, and configure the serial port parameters as
follows:
−
Bit per second: 9600
−
Data bit: 8
Parity: None
−
−
Stop bit: 1
−
Data flow control: None
Click OK. The copyright information is displayed on the HyperTerminal. You can enter
default user name admin and password Admin@123, modify the default password as
prompted to log in to the USG CLI.
Windows 7
Windows 7 does not include HyperTerminal like Windows XP did. However, you can
download a HyperTerminal program, such as PuTTY, for free from the Internet. PuTTY
is used as an example to describe the HyperTerminal configuration.
Download the PuTTY software to the local device and double-click it to run the
software.
Choose Session set the Connection type to Serial.
Set the PuTTY parameters.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Hardware Installation
190